Our Blog

If you’ve visited Lowder Orthodontics, then there’s a good chance you’re looking to perfect your smile by straightening your teeth with braces. At some point during your treatment, you may need to use elastics, otherwise known as rubber bands, for a certain period. These are used to apply additional pressure that will move your teeth in the right direction.

Placement of the elastics is specific to each patient’s teeth. These small rubber bands stretch over the tiny loops on both the top and bottom brackets. At first, Dr. Lowder may recommend you wear the elastics both day and night for an extended time.

You may be told to switch only to nighttime wear once the teeth are set in the correct position. By consistently wearing the elastics, you can shorten the overall time your braces will have to be on.

The elastics are made from medical-grade latex. If you have an allergy to latex, make sure to let Dr. Lowder know, so you can be given an alternate material. We will show you how to take elastics on and off when they’re given to you at your appointment.

You should remove them when you eat so they don’t become overstretched or break. It’s important not to overstretch the bands, and always to replace them if they break. Eventually it will become a familiar habit to carry the bands around with you for times when this might happen.

The Do’s and the Don’ts

• DO … always wash your hands before removing or replacing the rubber bands.
• DO … call us if you run out of elastics.
• DO … get in the habit of carrying around extra rubber bands as replacements.
• DON’T … double up on elastics because this can exert too much pressure on your teeth and could actually harm the roots.
• DON’T … overstretch the rubber bands or they will lose strength and become ineffective.

If you were recently given elastics as well as your braces, feel free to ask any questions during your appointment, or call our Idaho Falls, Rigby, Rexburg, Afton, and Salmon office any time. Using elastics correctly is one more step in your journey to a perfect smile!

Patients who need to get orthodontic treatment are often concerned about how long they will wear their braces. Dr. Lowder will tell you the good news is, is there is a solution for any patient who wants to minimize the time he or she needs to wear braces. AcceleDent is a device that uses micropulse technology to reduce how long your orthodontic treatment takes. Small vibrations go through your teeth, enabling them to move into their correct positions faster. The device needs to be worn only for a few minutes a day, and is a non-invasive and non-surgical way to make orthodontics more efficient.

How AcceleDent Works

The AcceleDent appliance is a custom mouthpiece that fits comfortably around your braces. It works with traditional braces, clear braces, and even Invisalign®. The mouthpiece is inserted once a day, an activator is turned on, and the mouthpiece is worn for just 20 minutes. You only need to bite the mouthpiece hard enough to hold it in place. You can participate in any activities you like while wearing it. The mouthpiece comes with an online usage history as well, so you can see how many times you have used it to make sure you are wearing it as intended.

Benefits of AcceleDent

Besides being hands-free, lightweight, and comfortable, you can benefit in a number of significant ways by using AcceleDent orthodontic treatment:

• It speeds up orthodontic treatment by up to 52 percent.
• AcceleDent® is only worn for 20 minutes a day.
• It is approved by the FDA.
• It is non-invasive and non-surgical.
• It helps with dental hygiene by minimizing the amount of time needed for orthodontic treatment.

Most of our patients at Lowder Orthodontics welcome the opportunity to reduce their orthodontic treatment time, and that’s just what AcceleDent offers. Contact our Idaho Falls, Rigby, Rexburg, Afton, and Salmon office or ask our team at your next appointment to see if AcceleDent is right for your smile!

Orthodontists like Dr. Lowder recommend a first orthodontic visit and evaluation for your child around the age of seven. We will evaluate your child’s jaw and facial development and make sure that there is enough room in the mouth for the permanent teeth when they arrive. One of the recommendations we might make for early treatment is the use of a palatal expander. If you are unfamiliar with this device, let’s take a closer look at why it’s necessary and what exactly it does.

Why do we recommend the palatal expander?

There are two dental arches, composed of the upper and the lower teeth, in your child’s mouth. This arch-shaped design is meant to accommodate all the permanent teeth. Further, when the upper and lower teeth meet, they should result in a healthy occlusion, or bite.

Sometimes, the upper dental arch is simply too small to accommodate all of your child’s permanent teeth, leading to crowding, extractions, and impacted teeth. Also, a too-narrow arch can result in a crossbite, where some of the upper teeth bite inside the lower ones. An improper bite can lead to problems such as TMJ (temporomandibular joint) disorder, improper wear and stress on teeth, certain speech difficulties, and other potential complications. The palatal expander was designed to prevent these problems from occurring.

What is a palatal expander and how does it work?

The expander itself is a device that increases the size of the upper dental arch. Before your child’s bones are finished growing, the space between the two bones of the upper palate is filled with cartilage. This tissue is flexible when children are young, but gradually fuses solidly into place by the time they are finished growing (usually in the early to mid-teens). If the arch can be widened to accommodate the emerging permanent teeth, or to reduce malocclusions, this improvement can also affect the need for, and length of, future dental work.

There are several types of expanders available at our Idaho Falls, Rigby, Rexburg, Afton, and Salmon office. These are custom-made appliances, commonly attached between the upper teeth on each side of the jaw. The two halves of the device are connected with a screw-type mechanism that can be adjusted to widen the upper palate and dental arch with gentle pressure. This is a gradual process, with small adjustments usually made once or twice a day to slowly move the bones further apart. As weeks go by, you will notice a successful change in the spacing of the teeth. Your child might even develop a gap in the front teeth, which is normal and will generally close on its own.

If you would like more detailed information, talk to Dr. Lowder about the palate expander. We can tell you what to expect from this treatment if we think it is best for your child’s unique needs, and how to make it as easy as possible for your child. Our goal is to provide your child with the healthiest teeth and bite possible, always making use of treatments that are both gentle and effective.

Dr. Lowder and our team at Lowder Orthodontics are excited to announce that we offer the AcceleDent System! AcceleDent, the first and only orthodontic micropulse device of its kind, can actually reduce the time you spend wearing braces, 38 to 50 percent faster than with traditional orthodontics alone.

Orthopedic doctors have been using micropulse technology for years, but it just recently became available for orthodontic treatment. The AcceleDent System consists of a light, comfortable, hands-free appliance that patients use for 20 minutes per day. Its gentle microvibrations help stimulate bone movement, resulting in the beautiful smile you’ve always wanted in less time than ever before.

To learn if AcceleDent is right for you, please give us a call at our convenient Idaho Falls, Rigby, Rexburg, Afton, and Salmon office to schedule an initial appointment with Dr. Lowder.